#ifndef __MYRADIO_GPIO_H_
#define __MYRADIO_GPIO_H_

#include <stdint.h>
#include <stdbool.h>
#include "stm32f10x.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_it.h" 
#include "board.h"

#define SPI_HARD

//已经在keil->Options for Target->C/C++中定义
// #define MODULE_IS_1W

typedef void (*RADIO_GPIO_CALLBACK)(uint8_t index);

//-------------射频模块引脚映射到转接板排针---------------
#ifdef MODULE_IS_1W

#define RF_SX128x_RST_PIN           BOARD_PIN_SPI_GPIOA  //
#define RF_SX128x_RST_PORT          BOARD_PORT_SPI_GPIOA
#define RF_SX128x_RST               RF_SX128x_RST_PORT, RF_SX128x_RST_PIN          //
//
#define RF_SX128x_BUSY_PIN           BOARD_PIN_SPI_GPIOD  //
#define RF_SX128x_BUSY_PORT          BOARD_PORT_SPI_GPIOD
#define RF_SX128x_BUSY               RF_SX128x_BUSY_PORT, RF_SX128x_BUSY_PIN          //
//IO1用于射频中断响应
#define RF_SX128x_IO1_PIN           BOARD_PIN_SPI_GPIOB  //
#define RF_SX128x_IO1_PORT          BOARD_PORT_SPI_GPIOB
#define RF_SX128x_IO1               RF_SX128x_IO1_PORT, RF_SX128x_IO1_PIN          //
//
#define RF_SX128x_IO2_PIN           BOARD_PIN_SPI_GPIOE  //
#define RF_SX128x_IO2_PORT          BOARD_PORT_SPI_GPIOE
#define RF_SX128x_IO2               RF_SX128x_IO2_PORT, RF_SX128x_IO2_PIN          //
//
#define RF_SX128x_IO3_PIN          BOARD_PIN_SPI_GPIOC  //
#define RF_SX128x_IO3_PORT         BOARD_PORT_SPI_GPIOC
#define RF_SX128x_IO3              RF_SX128x_IO3_PORT, RF_SX128x_IO3_PIN          //
//外部PA和LNA控制脚
#define RF_EXTPA_RE_PIN      BOARD_PIN_SPI_GPIOE  //
#define RF_EXTPA_RE_PORT     BOARD_PORT_SPI_GPIOE
#define RF_EXTPA_RE          RF_EXTPA_RE_PORT, RF_EXTPA_RE_PIN          //
#define RF_EXTPA_TE_PIN      BOARD_PIN_SPI_GPIOF  //
#define RF_EXTPA_TE_PORT     BOARD_PORT_SPI_GPIOF
#define RF_EXTPA_TE          RF_EXTPA_TE_PORT, RF_EXTPA_TE_PIN          //

#else
//
#define RF_SX128x_RST_PIN           BOARD_PIN_SPI_GPIOA  //
#define RF_SX128x_RST_PORT          BOARD_PORT_SPI_GPIOA
#define RF_SX128x_RST               RF_SX128x_RST_PORT, RF_SX128x_RST_PIN          //
//
#define RF_SX128x_BUSY_PIN           BOARD_PIN_SPI_GPIOB  //
#define RF_SX128x_BUSY_PORT          BOARD_PORT_SPI_GPIOB
#define RF_SX128x_BUSY               RF_SX128x_BUSY_PORT, RF_SX128x_BUSY_PIN          //
//IO1用于射频中断响应
#define RF_SX128x_IO1_PIN           BOARD_PIN_SPI_GPIOC  //
#define RF_SX128x_IO1_PORT          BOARD_PORT_SPI_GPIOC
#define RF_SX128x_IO1               RF_SX128x_IO1_PORT, RF_SX128x_IO1_PIN          //
//
#define RF_SX128x_IO2_PIN           BOARD_PIN_SPI_GPIOD  //
#define RF_SX128x_IO2_PORT          BOARD_PORT_SPI_GPIOD
#define RF_SX128x_IO2               RF_SX128x_IO2_PORT, RF_SX128x_IO2_PIN          //
//
#define RF_SX128x_IO3_PIN          BOARD_PIN_SPI_GPIOE  //
#define RF_SX128x_IO3_PORT         BOARD_PORT_SPI_GPIOE
#define RF_SX128x_IO3              RF_SX128x_IO3_PORT, RF_SX128x_IO3_PIN          //
//外部PA和LNA控制脚
#define RF_EXTPA_RE_PIN      BOARD_PIN_SPI_GPIOG  //
#define RF_EXTPA_RE_PORT     BOARD_PORT_SPI_GPIOG
#define RF_EXTPA_RE          RF_EXTPA_RE_PORT, RF_EXTPA_RE_PIN          //
#define RF_EXTPA_TE_PIN      BOARD_PIN_SPI_GPIOF  //
#define RF_EXTPA_TE_PORT     BOARD_PORT_SPI_GPIOF
#define RF_EXTPA_TE          RF_EXTPA_TE_PORT, RF_EXTPA_TE_PIN          //

#endif
//-------------射频模块引脚映射到转接板排针---------------END

uint8_t READ_RF_SX128x_BUSY(void);
uint8_t READ_RF_SX128x_IO1(void);
void RF_SX128x_RST_H(void);
void RF_SX128x_RST_L(void);
void RF_SX128x_BUSY_H(void);
void RF_SX128x_BUSY_L(void);
void RF_SX128x_IO1_H(void);
void RF_SX128x_IO1_L(void);
void RF_SX128x_IO2_H(void);
void RF_SX128x_IO2_L(void);
void RF_SX128x_IO3_H(void);
void RF_SX128x_IO3_L(void);

void RF_EXT_PA_RE_H(void);
void RF_EXT_PA_RE_L(void);
void RF_EXT_PA_TE_H(void);
void RF_EXT_PA_TE_L(void);

#define RF_EXT_PA_TO_TX() RF_EXT_PA_TE_H();RF_EXT_PA_RE_L()
#define RF_EXT_PA_TO_RX() RF_EXT_PA_TE_L();RF_EXT_PA_RE_H()
#define RF_EXT_PA_TO_IDLE() RF_EXT_PA_TE_L();RF_EXT_PA_RE_L()

void BOARD_SPI_NSS_H(void);
void BOARD_SPI_NSS_L(void);

//-------------将封装的API映射到射频模块硬件层---------------
void myRadio_gpio_init(RADIO_GPIO_CALLBACK cb);
void myRadio_gpio_intoLwPwr(bool sta);
uint8_t myRadioSpi_rwByte(uint8_t byteToWrite);
void myRadioSpi_wBuffer(uint8_t* pData, uint16_t len);
void myRadioSpi_rBuffer(uint8_t* pData, uint16_t len);
void myRadioSpi_rwBuffer(uint8_t* pDataR, uint8_t* pDataW, uint16_t len);

#define SpiReadWrite(p)                 myRadioSpi_rwByte(p)
#define SpiWriteData(p1, p2)            myRadioSpi_wBuffer(p1, p2)
#define SpiReadData(p1, p2)             myRadioSpi_rBuffer(p1, p2)
#define SpiWriteReadData(p1, p2, p3)    myRadioSpi_rwBuffer(p2, p1, p3)
#define RF_SPI_NSS_H()                  BOARD_SPI_NSS_H()
#define RF_SPI_NSS_L()                  BOARD_SPI_NSS_L()
//-------------将封装的API映射到射频模块硬件层---------------END
#endif