easydemo_297s/project/board.h

#ifndef __BOARD_H
#define __BOARD_H
#include "stm32f10x.h"
#include "stm32f10x_gpio.h"

//--------------------------------------------
#define BOARD_PIN_SPI_CLK    GPIO_Pin_5     //SPI1_SCK(8)
#define BOARD_PORT_SPI_CLK   GPIOA          //DAC_OUT2 ADC12_IN5
#define BOARD_GPIO_SPI_CLK   BOARD_PORT_SPI_CLK, BOARD_PIN_SPI_CLK          //

#define BOARD_PIN_SPI_MISO    GPIO_Pin_6    //SPI1_MISO(8)
#define BOARD_PORT_SPI_MISO   GPIOA         // TIM8_BKIN/ADC12_IN6
                                            // TIM3_CH1(8)
#define BOARD_GPIO_SPI_MISO   BOARD_PORT_SPI_MISO, BOARD_PIN_SPI_MISO         //

#define BOARD_PIN_SPI_CSN    GPIO_Pin_4     //SPI1_NSS(8)/
#define BOARD_PORT_SPI_CSN   GPIOA          // USART2_CK(8)
                                            // DAC_OUT1/ADC12_IN4
#define BOARD_GPIO_SPI_CSN   BOARD_PORT_SPI_CSN, BOARD_PIN_SPI_CSN          //

#define BOARD_PIN_SPI_GPIOA    GPIO_Pin_5   //ADC12_IN15
#define BOARD_PORT_SPI_GPIOA   GPIOC
#define BOARD_GPIO_SPI_GPIOA   BOARD_PORT_SPI_GPIOA, BOARD_PIN_SPI_GPIOA          //

#define BOARD_PIN_SPI_GPIOB    GPIO_Pin_0   //ADC12_IN8/TIM3_CH3        TIM1_CH2N
#define BOARD_PORT_SPI_GPIOB   GPIOB        // TIM8_CH2N，N表示互补输出功能
#define BOARD_GPIO_SPI_GPIOB   BOARD_PORT_SPI_GPIOB, BOARD_PIN_SPI_GPIOB          //

#define BOARD_PIN_SPI_GPIOC    GPIO_Pin_1   //ADC12_IN9/TIM3_CH4(8)
#define BOARD_PORT_SPI_GPIOC   GPIOB        // TIM8_CH3N，N表示互补输出功能
#define BOARD_GPIO_SPI_GPIOC   BOARD_PORT_SPI_GPIOC, BOARD_PIN_SPI_GPIOC          //

#define BOARD_PIN_SPI_GPIOD    GPIO_Pin_2   //USART2_TX(8)/TIM5_CH3
#define BOARD_PORT_SPI_GPIOD   GPIOA        // ADC123_IN2/
#define BOARD_GPIO_SPI_GPIOD   BOARD_PORT_SPI_GPIOD, BOARD_PIN_SPI_GPIOD          //
                                            // TIM2_CH3 (8)

#define BOARD_PIN_SPI_GPIOE    GPIO_Pin_10  //I2C2_SCL/USART3_TX(8)         TIM2_CH3
#define BOARD_PORT_SPI_GPIOE   GPIOB
#define BOARD_GPIO_SPI_GPIOE   BOARD_PORT_SPI_GPIOE, BOARD_PIN_SPI_GPIOE          //

#define BOARD_PIN_SPI_GPIOF    GPIO_Pin_11  //I2C2_SDA/USART3_RX(8)         TIM2_CH4
#define BOARD_PORT_SPI_GPIOF   GPIOB
#define BOARD_GPIO_SPI_GPIOF   BOARD_PORT_SPI_GPIOF, BOARD_PIN_SPI_GPIOF          //

#define BOARD_PIN_SPI_GPIOG    GPIO_Pin_12  //SPI2_NSS/I2S2_WS/
#define BOARD_PORT_SPI_GPIOG   GPIOB        // I2C2_SMBA/
                                            // USART3_CK(8)/
                                            // TIM1_BKIN(8)
#define BOARD_GPIO_SPI_GPIOG   BOARD_PORT_SPI_GPIOG, BOARD_PIN_SPI_GPIOG          //

#define BOARD_PIN_SPI_GPIOH    GPIO_Pin_13  //SPI2_SCK/I2S2_CK
#define BOARD_PORT_SPI_GPIOH   GPIOB        // USART3_CTS(8)/
                                            // TIM1_CH1N
#define BOARD_GPIO_SPI_GPIOH   BOARD_PORT_SPI_GPIOH, BOARD_PIN_SPI_GPIOH          //


#define BOARD_PIN_H Bit_SET
#define BOARD_PIN_L Bit_RESET

//-----------------------LED指示灯，低电平驱动
#define BOARD_PIN_LED1    GPIO_Pin_3   //
#define BOARD_PORT_LED1   GPIOA         
#define BOARD_GPIO_LED1   BOARD_PORT_LED1, BOARD_PIN_LED1          //

#define BOARD_PIN_LED2    GPIO_Pin_3
#define BOARD_PORT_LED2   GPIOC
#define BOARD_GPIO_LED2   BOARD_PORT_LED2, BOARD_PIN_LED2          //


#define LED_ON   Bit_RESET
#define LED_OFF   Bit_SET

#define BOARD_PIN_BEEP    GPIO_Pin_12
#define BOARD_PORT_BEEP    GPIOA
#define BOARD_GPIO_BEEP   BOARD_PORT_BEEP, BOARD_PIN_BEEP          //

#define BEEP_ON   Bit_SET
#define BEEP_OFF   Bit_RESET
//-----------------------------------------LED指示灯，END
//-----------------------LCD显示器驱动IO口
#define BG_LED_ON   Bit_RESET
#define BG_LED_OFF   Bit_SET
#define BOARD_PIN_LCD_BG_LED    GPIO_Pin_4   //
#define BOARD_PORT_LCD_BG_LED   GPIOB
#define BOARD_GPIO_LCD_BG_LED   BOARD_PORT_LCD_BG_LED, BOARD_PIN_LCD_BG_LED          //

#define BOARD_PIN_LCD_SDA    GPIO_Pin_7   //
#define BOARD_PORT_LCD_SDA   GPIOB
#define BOARD_GPIO_LCD_SDA   BOARD_PORT_LCD_SDA, BOARD_PIN_LCD_SDA          //

#define BOARD_PIN_LCD_CLK    GPIO_Pin_6   //
#define BOARD_PORT_LCD_CLK   GPIOB
#define BOARD_GPIO_LCD_CLK   BOARD_PORT_LCD_CLK, BOARD_PIN_LCD_CLK          //

#define BOARD_PIN_LCD_RST    GPIO_Pin_5   //
#define BOARD_PORT_LCD_RST   GPIOB
#define BOARD_GPIO_LCD_RST   BOARD_PORT_LCD_RST, BOARD_PIN_LCD_RST          //

#define LCD_SDA_H()     GPIO_WriteBit(BOARD_GPIO_LCD_SDA, Bit_SET)
#define LCD_SDA_L()     GPIO_WriteBit(BOARD_GPIO_LCD_SDA, Bit_RESET)
#define READ_LCD_SDA()     GPIO_ReadInputDataBit(BOARD_GPIO_LCD_SDA)
#define LCD_CLK_H()     GPIO_WriteBit(BOARD_GPIO_LCD_CLK, Bit_SET)
#define LCD_CLK_L()     GPIO_WriteBit(BOARD_GPIO_LCD_CLK, Bit_RESET)

#define LCD_RST_ENABLE()     GPIO_WriteBit(BOARD_GPIO_LCD_RST, Bit_RESET)
#define LCD_RST_DISABLE()     GPIO_WriteBit(BOARD_GPIO_LCD_RST, Bit_SET)

#define LCD_BG_LED_ON()     GPIO_WriteBit(BOARD_GPIO_LCD_BG_LED, BG_LED_OFF)
#define LCD_BG_LED_OFF()     GPIO_WriteBit(BOARD_GPIO_LCD_BG_LED, BG_LED_ON)

//-----------------------------------------LCD显示器驱动IO口，END

#define BOARD_PIN_KEY1    GPIO_Pin_0
#define BOARD_PORT_KEY1   GPIOA
#define BOARD_GPIO_KEY1   BOARD_PORT_KEY1, BOARD_PIN_KEY1          //

#define BOARD_PIN_KEY2    GPIO_Pin_14
#define BOARD_PORT_KEY2   GPIOB
#define BOARD_GPIO_KEY2   BOARD_PORT_KEY2, BOARD_PIN_KEY2          //

#define BOARD_PIN_KEY3    GPIO_Pin_15
#define BOARD_PORT_KEY3   GPIOB
#define BOARD_GPIO_KEY3   BOARD_PORT_KEY3, BOARD_PIN_KEY3          //

#define BOARD_PIN_KEY4    GPIO_Pin_6
#define BOARD_PORT_KEY4   GPIOC
#define BOARD_GPIO_KEY4   BOARD_PORT_KEY4, BOARD_PIN_KEY4          //

#define BOARD_PIN_KEY5    GPIO_Pin_7
#define BOARD_PORT_KEY5   GPIOC
#define BOARD_GPIO_KEY5   BOARD_PORT_KEY5, BOARD_PIN_KEY5          //

#define BOARD_PIN_CURRENT_AD    GPIO_Pin_1  //对应ADC1
#define BOARD_PORT_CURRENT_AD   GPIOA       
#define BOARD_GPIO_CURRENT_AD   BOARD_PORT_CURRENT_AD, BOARD_PIN_CURRENT_AD          //
#endif