修复spi的myRadioSpi_rwByte超时操作i

gitFocePushRemote.bat

@@ -0,0 +1,7 @@
+@echo off  
+setlocal  
+  
+:: 假设你已经处于正确的Git仓库目录中  
+  
+:: 添加所有更改到暂存区  
+git push -f --set-upstream origin master:master

radio/myRadio_gpio.c

@@ -217,13 +217,13 @@ void myRadio_gpio_init(RADIO_GPIO_CALLBACK cb)
 }
 uint8_t myRadioSpi_rwByte(uint8_t byteToWrite)
 {
-    uint8_t i, temp;
-    temp = 0;   
+    uint16_t i = 0;
+    uint8_t temp = 0;   
 #if defined(SPI_HARD)
 	while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_TXE) == RESET) //检查指定的SPI标志位设置与否:发送缓存空标志位
     {
         i++;
-        if(i > 200)return 0;
+        if(i > 2000)return 0;
     }			  
 	SPI_I2S_SendData(SPI1, byteToWrite); //通过外设SPIx发送一个数据
 	i=0;
@@ -231,7 +231,7 @@ uint8_t myRadioSpi_rwByte(uint8_t byteToWrite)
 	while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_RXNE) == RESET)//检查指定的SPI标志位设置与否:接受缓存非空标志位
     {
         i++;
-        if(i > 200)return 0;
+        if(i > 2000)return 0;
     }
     /*!< Return the byte read from the SPI bus */
     temp = SPI_I2S_ReceiveData(SPI1);
@@ -268,23 +268,23 @@ uint8_t myRadioSpi_rwByte(uint8_t byteToWrite)
 
 void myRadioSpi_wBuffer(uint8_t* pData, uint8_t len)
 {
-  uint8_t i;
-  
-  for(i = 0; i < len; i++)
-  {
-    myRadioSpi_rwByte(*pData);
-    pData ++;
-  }
+    uint8_t i;
+    
+    for(i = 0; i < len; i++)
+    {
+        myRadioSpi_rwByte(*pData);
+        pData ++;
+    }
 }
 
 void myRadioSpi_rBuffer(uint8_t* pData, uint8_t len)
 {
-  uint8_t i;
-  
-  for(i = 0; i < len; i++)
-  {
-    *pData = myRadioSpi_rwByte(0xFF);
-    pData ++;
-  }
+    uint8_t i;
+    
+    for(i = 0; i < len; i++)
+    {
+        *pData = myRadioSpi_rwByte(0xFF);
+        pData ++;
+    }
 }