| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- Load "e:\\xxxx2\\evaluationBoard\\software\\adapterBoardDriver_VG237xSxxxN0S1_V04\\keil_v5\\Objects\\adapterBoardDriver_VGdd79SxxxN0SA_V04.axf"
- Set JLink Project File to "e:\xxxx2\evaluationBoard\software\adapterBoardDriver_VG237xSxxxN0S1_V04\keil_v5\JLinkSettings.ini"* JLink Info: Device "STM32F103RC" selected.
-
- JLink info:
- ------------
- DLL: V6.90a, compiled Dec 14 2020 17:14:31
- Firmware: J-Link V9 compiled Feb 2 2021 16:34:10
- Hardware: V9.70
- S/N : 59768894
- Feature(s) : RDI, GDB, FlashDL, FlashBP, JFlash
-
- * JLink Info: Found SW-DP with ID 0x2BA01477
- * JLink Info: Found SW-DP with ID 0x2BA01477
- * JLink Info: DPIDR: 0x2BA01477
- * JLink Info: Scanning AP map to find all available APs
- * JLink Info: AP[1]: Stopped AP scan as end of AP map has been reached
- * JLink Info: AP[0]: AHB-AP (IDR: 0x24770011)
- * JLink Info: Iterating through AP map to find AHB-AP to use
- * JLink Info: AP[0]: Core found
- * JLink Info: AP[0]: AHB-AP ROM base: 0xE00FF000
- * JLink Info: CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
- * JLink Info: Found Cortex-M4 r0p1, Little endian.
- * JLink Info: Identified core does not match configuration. (Found: Cortex-M4, Configured: Cortex-M3)
- * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
- * JLink Info: CoreSight components:
- * JLink Info: ROMTbl[0] @ E00FF000
- * JLink Info: ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
- * JLink Info: ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
- * JLink Info: ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
- * JLink Info: ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
- * JLink Info: ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU
- * JLink Info: ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM
- ROMTableAddr = 0xE00FF000
- * JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
- * JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.
-
- Target info:
- ------------
- Device: STM32F103RC
- VTarget = 3.211V
- State of Pins: TCK: 0, TDI: 1, TDO: 0, TMS: 1, TRES: 1, TRST: 1
- Hardware-Breakpoints: 6
- Software-Breakpoints: 8192
- Watchpoints: 4
- JTAG speed: 12000 kHz
-
- Full Chip Erase Done.Programming Done.Verify OK.* JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET.
- * JLink Info: Reset: Reset device via AIRCR.SYSRESETREQ.
- Application running ...
- Flash Load finished at 09:28:53
|
